Analog connections – Teo UC Pro Server User Manual
Page 22
Teo UC Pro Server Installation Instructions
Page 22
13-280137 Rev. C
A
A
n
n
a
a
l
l
o
o
g
g
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
s
s
WARNING! RISK OF EQUIPMENT DAMAGE
!
The UC Pro Server supplies power on FXS device ports, and receives
power from the telephone trunks on FXO trunk ports.
Ensure that the correct UC Pro Server ports are used when connecting
analog trunks or station devices.
Multiple cards with analog ports may be installed; some cards may also include PRI ports.
When facing the back of the server, card 1 is on the left, as shown below. Ports on each
card are numbered 1-4, with port 1 on the bottom.
Note – The connector arrangement and number of connectors per card may differ, depending on
the server configuration.
• To determine analog port configuration, apply power to the UC Pro Server to
illuminate the ports (page 19).