Thinklogical X4 and Touchpanels - Manual (Page 44)

®
V e l o c i t y D V I E x t e n d e r P r o d u c t M a n u a l , R e v . H , D e c . 2 0 1 4 Page 42
A.3. VEL-6
Receiver VEL-000M06-LCRX
CPU
Primary DDC Port
Power Supply
(PWR-000022-R)
Power Supply
(PWR-000022-R)
Digital Video Extender-6 Dual-Link Installation Overview
Velocity dvi
STEP 5: Connect the video source
(CPU) to the Tx with a DVI-D M-M
Cable. An optional local display can also
be connected using a DVI-D M-M Cable.
5
4
2
STEP 2: Connect the supplied AC Power
Adapter (PWR-000022-R) to the Rx and
plug it into a standard AC source.
3
STEP 3: Connect the DVI to Display DDC
port to a video monitor (or projector or other
viewing device) with a DVI-D M-M Cable. A
second device can be installed at the DVI to
Display port using a similar cable. Turn on the
DVI video devices.
1
STEP 1: Connect multi-mode fiber optic cables
(up to 1000 meters) between the Rx and Tx units.
L1: Data Tx to Rx & Video Primary
L2: Data Rx to Tx
L3: Video Secondary
STEP 4: Connect the supplied AC Power
Adapter (PWR-000022-R) to the Tx and
plug it into a standard AC source.
L1
L2 L3
L3 L2
L1
Local
Monitor
Dual-Link
DVI OUT
Dual-Link
DVI OUT
DDC
Transmitter VEL-000M06-LCTX