Verilink 2048 (34-00179) Product Manual - Manual (Page 7)

1-4 General 2048 PMU/NTU
rial Authorization number or to arrange service, please have
the following information available:
• Model number(s) and serial number(s) for the unit(s).
• Reason for return and symptoms of problem.
• Warranty status (if known).
• Purchase order number to cover charges for out-of-
warranty items.
• Name and phone number of person we can contact if
we have questions about the unit(s).
• Mode of shipment required (second day air is the nor-
mal mode of shipment for all returned material unless
otherwise specified).
As soon as TxPORT has the above information, the RMA
that must accompany the item(s) returned can be issued.
1.5 Ordering Numbers
The unit is shipped from the factory with the 2048 PMU/
NTU reference manual. Refer to
Table 1-1 for optional
equipment part numbers.
The part numbers for the stand -alone unit and the modular
chassis unit are shown in the following table:
For example, the default part number for the stand-alone
unit is ‘
F – 2048– 100 – – 111 ’. This is a unit equipped
with BNC connectors on the backplane.
The following accessories may also be needed for the instal-
lation and operation of the TxPORT 2048 PMU/ NTU.
Table 1-1 Optional Equipment
1.6 TxPORT Customer Service
TxPORT
127 Jetplex Circle
Madison, Alabama 35758
Telephone Number: 800-926-0085 or
205-772-3770
Sales /Administration FAX: 205 -772- 3388
Manufacturing FAX: 205-772-8280
Customer Service Returns: 800 -926-0085, ext. 227
Product Technical Support (Normal Hours)
8 a.m. to 5 p.m. Central Time, Monday – Friday)
Telephone Number:
800-285-2755 or
205-772-3770
Emergency (Nights / Weekends / Holidays)
Telephone Number:
800-285-2755
Internet Address: [email protected]
Part Number Description
F-2048-100-11C
C =
1
2
3
4
5
2048 PMU/NTU stand- alone unit
Backplane option
with BNC connector
with Tri-axial connector
with Twin-axial connector
with DB15 connector
with BNC and DB15
F-2048-101-111 2048 PMU /NTU module (chassis)
Part Number Description
Cables
9-1001-027-1
9-1001-027-2 DB25 male to 6-pin RJ11 (modem to SUPV)
DB25 female to 6-pin RJ11 (modem to SUPV)
9-1001-028-1
9-1001-028-2 DB25 male to 6-pin RJ11 (terminal to SUPV)
DB25 female to 6-pin RJ11 (terminal to SUPV)
9-1001-029-2 DB9 female to 6-pin RJ11 (terminal to SUPV)
9-1001-048-1
9-1001-048-2 DB25 male to two 6-pin RJ11 (terminal to NMS)
DB25 female to two 6- pin (terminal to NMS)
33-00085
33-00086 Bantam to bantam test cord - red
Bantam to bantam test cord - black
Mounting
F-1051-000--112 Twelve-slot 1051 chassis with RJ48C and DB25
backplane connectors
9-2000-001--1
9-2000-001--2
9-2000-002--1
9-2000-002--2 19" single unit rack mount bracket
19" dual rack mount bracket
23" single unit rack mount bracket
23" dual rack mount bracket
9-2000-036--1 Stand-alone to rack mount conversion module
with DB25 to 6- pin adapter
Power
F-1040-000--110
9-1000-48V-1
1040 power shelf (type 400 mechanics)
w/o power supplies
One -48V/2A power supply (1040 holds 2)
F-1041-000--110
9-1000-48V-2
Redundant 1041 power shelf (type 400
mechanics) w/o power supplies
One -48V/2A power supply (1041 holds 2)
30-00087 Stand-alone wall mount power supply
(-48VDC/200mA)
Misc.
9-8000-001-1
9-8000-001-2 EM8000 with manual on 3-1/2 inch disk (DOS
and UNIX version, respectively)