Visara CCA-3074 Installation - Manual (Page 50)

Chapter 4. ESCON CU Configuration
4-8 707161-003
Bytes per Trace Record: This setting determines the size of each trace record for data
traces recorded for this subchannel. The default value is 1024. Values allowed are:
 1024
 512
 256
 128
 64
Enabled: This checkbox indicates whether the status of this subchannel is to be included
in the Status displays. If the Enabled box is not checked, then there will be no reference
in the Status display. This might be desirable if the subchannel is not normally used.
Button Definitions:
Update: The Update button causes the information on the panel to update the
configuration file. You must press the [Update] button before leaving the panel if you
want the changes to be made, otherwise the changes will be discarded.
Return: Selecting this button will take you back to the Update ESCON/FICON CUs
panel.