Visara Master Console Center Administration Guide - Manual (Page 85)

Chapter 5 MCC system.cfg Configuration File
Administration Guide 85
hostname No 0 or 1 Network host name for the
system. Typically, this will
be the same as the OS
name, but the true network
host name may differ due
to character limitations. If
you use the MCC/BMC
PATROL integration
product, the host name
must refer to the name of
the host as reported by
BMC PATROL agents. The
MCC OS name refers to
the name of an OS inside
the MCC.
mvsagent No 0 or 1 Associates an MVSAGENT
configuration with the OS.
The MVS Agent is a
command path to the
mainframe, and can also be
used as a higher
bandwidth printer output
transport. This alternative
communication requires
VISARA's product on the
MVS LPAR.
It must not be present in
the OS section for
MCCStars.
Table 17 Valid Keys for OS Section