Watson-Marlow PF22 - Manual (Page 11)

Operators Manual
PF22
PF22 OM EN 74-132-005 v1.02.doc Version: 1.02 Page 11 of 34
5 Programming
5.1 Starting PF22
When turning on the main switch, the display will show the following:
PF22 V1.1 (C) Flexicon’ 03
PRESS GO TO CONTINUE
Press the <GO> key, and the display will show the following:
FUNCTION NO.:
F 1: VOLUME (ml): 100.00
The value shown in the status line will be the above or the latest value used.
PF22 is now ready to be programmed.
5.2 Parameters
In the following, a parameter will be the value of a single function, for instance: volume, velocity or
number of fills.
5.3 Programs
In the following descriptions, a program will be a complete set of parameters which together will
constitute the PF22 work instructions.