Watson-Marlow PF22 - Manual (Page 22)

Operators Manual
PF22
PF22 OM EN 74-132-005 v1.02.doc Version: 1.02 Page 22 of 34
6.4 Tube assembly
After selecting a suitable tube dimension and after fitting the tubes with Y- connector and filling
needle, assemble the tubes in the dispenser head.
Fig. 6.3
Open the dispenser head by turning the two locking pins (1) over the tube bridge (2), after which
the tube bridge can be lifted up.
It will now be possible to remove the tube lock (3) from its dowel pin.