Welltech VoIP ATA series V.2.1 - Manual (Page 47)

ATA-171/172/171P/171M/171+/172+
User’s Guide
5.10.1 Call Waiting Setting
5.10.1 Function
Call Waiting Setting provides call waiting function.
5.10.2 Instruction
Figure Call Waiting Setting
Call Waiting Default: ON, when setting OFF, call waiting function will be off.
Submit [Button] Submit the change.
Reset [Button] Clear the change.
5.10.3 Operate Instruction
Example 1: Close call waiting function
Step 1: On the main page, select [Phone Setting  Call Waiting Setting], enter [Call Waiting
Setting] page, after revising information (e.g. Call Waiting: off) (See Figure 1), then click
[Submit].
(Figure 1)
Step 2: After saving change, enter [Note Information] page, “Note Information” will be seen,
then the changing will come into effect.
Step 3: On the main page, select [Save Change] item, enter [Save Changes] page, and execute
the saving command by press [Save]. [Note Information] page will be seen which means
saving successfully. And the system will be restarted, please wait for a while.
Step 4: When there is a new call during calling, busy tone will be heard.
Example 2: Start the call waiting function
Step 1: On the main page, select [Phone Setting  Call Waiting Setting], enter [Call Waiting
Setting] page, after revising information (e.g. Call Waiting: off) (See Figure 1), then click
[Submit].