Westermo TD-36 - Manual (Page 29)

29 6618-2202
CLICK!
10 mm *
(0.4 inches)
25 mm
25 mm * Spacing (left/right) recommended for
full operating temperature range
Cooling
This unit uses convection cooling. To avoid
obstructing the airflow around the unit, use the
following spacing rules. Minimum spacing 25 mm
(1.0 inch) above /below and 10 mm (0.4 inches)
left /right the unit. Spacing is recommended for
the use of unit in full operating temperature
range and service life.
Removal
Press down the black support at the back of the unit
using a screwdriver, see figure.
Mounting
This unit should be mounted on 35 mm DIN-rail, which is
horizontally mounted inside an apparatus cabinet, or similar.
Snap on mounting, see figure.