Led indicators – Westermo ADSL-350 User Manual

Page 11

Advertising
background image

11

6623-2231

LED Indicators

LED

Status

Description

DSL

STS

Status

RED

Indicates a fault, except during boot-up

RED FLASH

Indicates a fault, except during boot-up

GREEN

All OK

GREEN & ONE RED FLASH All OK but no VPN peer connected

PWR

Power

OFF

Unit has no power

GREEN

All OK

SIG

Connection
status

RED

No ADSL connection configured or
network fault

GREEN / RED

Network connection fault

GREEN 1 BLINK

Connection link speed indication

1 Low
3 Normal
6 High (≥24 Mbit/s)

GREEN 2 BLINKS
GREEN 3 BLINKS
GREEN 4 BLINKS
GREEN 5 BLINKS
GREEN 6 BLINKS

DSL

ADSL link
status

OFF

No ADSL connection

GREEN FLASH

Negotiating with the provider DSLAM

GREEN

All OK, ADSL link established

STS LED – Status indicator
The status indicator reports the health of the unit. In normal operation the indicator will
be green, however, if a fault is detected, either at boot-up or during normal operation, the
indicator will light red. When the unit is first switched on or is reset the indicator will
first light red, then flash red in sequence with the SIG LED, this is normal behavior during
boot-up and does not indicate a fault.
Configuring a VPN connection in the ADSL-350 and activating the service will cause the
STS LED to be lit GREEN but FLASH RED every third (3) second to indicate that no
peer is connected on the VPN. The feature of the VPN status in the STS LED makes it
easy for staff to see whether or not the VPN connection is working without having to
login to the device.

PWR LED – Power indicator
The power indicator will light green when power is applied. If the indicator does not light
when power is applied check the power supply voltage and connections, refer to see
page 8 for details.

SIG LED – Connection status
The Signal Strength Indicator reports the state of the ADSL network connection. The
ADSL sync speed is indicated by the number of green flashes of the indicator within
an indicator period. Each indicator green flash will be followed by a short off time, an
extended off time indicates the end of the indicator period.

Advertising