Westermo ADSL-350 User Manual
Page 16
16
6623-2231
Step 6 – Change to the ADSL setup menu
Start by clicking on
ADSL in the top-menu followed by Connection in the sub-menu.
Then click on
Add new connection.
Step 7 – Find your ADSL connection settings
Refer to the table below to find your settings for the ADSL connection. If you cannot find
your specific connection in the table, please contact your local provider and ask them
about the settings. Sometimes you also get the information in your “start-package” from
the provider. If you are unable to find these settings, please do not hesitate to contact
Westermo Support, see the last page for details in your country, or have a look on the
Westermo website.
Use the VPI, VCI, ATM Enc. and Connection Type settings to configure your ADSL connec-
tion in the next steps.
ADSL Settings per country (Verified July 2012)
Country
Provider
VPI
VCI
ATM enc. Connection type
Austria
Telecom Austria
8
48
VC MUX
PPPoA
Ireland
Eirecom
8
35
LLC
PPPoE
Italy
Libero
8
35
VC MUX
PPPoA
Italy
Telecom Italia
8
35
VC MUX
PPPoA
Italy
Tiscali
8
35
VC MUX
PPPoA
Italy
Tele2
8
35
VC MUX
PPPoA
Netherlands
KPN (MXStream)
8
48
VC MUX
PPPoA
Netherlands
KPN (Business)
2
32
VC MUX
PPPoA
Netherlands
Bbned (Fast)
0
35
VC MUX
PPPoA
Netherlands
BBNed
0
35
LLC
Mac encapsulation routing / DHCP
Netherlands
Versatel
0
32
VC MUX
PPPoA
Netherlands
Telfort
0
34
LLC
Mac encapsulation routing / DHCP
Sweden
TeliaSonera
8
35
LLC
Mac encapsulation routing / DHCP
United Kingdom
British Telecom (BT)
0
38
VC MUX
PPPoA
Note! The default settings of the unit are UK & BT (marked in bold in the table above).