Westermo ADSL-350 - Manual (Page 7)

7 6623-2231
Description
Remote access removes boundaries, eliminates the need for time consuming site visits
and provides a network infrastructure suitable for today's “always-on” society. The ADSL-
350 is an industrially designed ADSL broadband router built to cope with harsh environ-
ments and the characteristics of industrial applications. The unit supports a wide range of
ADSL-standards and has support for long lines.
Most devices today comes equipped with an Ethernet port for communications, therefore
the ADSL-350 has a built-in two port Ethernet switch. For legacy connectivity the unit
also features one RS-232-port to provide multiple connection possibilities for both new
and legacy replacement installations. Designed to be installed on a DIN rail all connectors
and LEDs have been positioned in the front of the unit, facing the user for easy access
and fast status feedback. With the wide power input range the unit can be powered from
10 to 60 VDC and has low power consumption.
The cyber security features of the ADSL-350 prevent unauthorized access and secure the
communication for Internet-enabled applications. The easy to use firewall filters incom-
ing traffic, allowing only approved packets to pass through. To inter-connect units with
each other securely over the Internet multiple VPN technologies are supported, including
IPsec and OpenVPN.
Upgrading legacy solutions to become IP-enabled can prove both costly and tedious
therefore the ADSL-350 includes a wide feature set for various legacy applications includ-
ing both modem replacement methods as well as serial to Ethernet conversion. If there
are applications that require extra attention Westermo's extensive experience from
over 35 years within industrial data communications and over 5 years of industrial ADSL
expertise will be available to assist you.
Dimensional drawing
92,3 ±0,5 4,4 ±0,5
36
±0,5
103
±0,5
53 ±0,5 (mm)