ZeeVee EAS - Emergency Alert System (QAM & DVB-T/C) - Manual (Page 5)

5 w w w . z e e v e e . c o m
G E N E R A T I N G E A S A L E R T S
Monroe R189 Configuration
After configuring the ZeeVee unit for EAS, configure Monroe R189 in the Setup tab on the web administration page.
2. Click on Audio and then the Audio
Output Levels/Tests tab.
3. Select 48000 samples per second.
ZeeVee devices require audio
that has been sampled at 48000
samples per second.
Configuring Network and Time
In the Setup section:
1. Click on Time and enter the NTP
configuration location (name or
IP address) on the R189. This
location should match the server
configured on the ZeeVee device.