Waterproof solution with naked cable, E 14, Hardware manual – ACTi KCM-7111 User Manual
Page 14
Advertising
Hardware Manual
Waterproof Solution with Naked Cable
This section describes the procedures in using the bundled cable gland and an exterior-grade
Ethernet cable.
1.
Disassemble the cable gland as shown below:
2.
Insert the clamping nut into the Ethernet cable.
3.
Insert the sealing insert with claw.
Body
(with Washer)
Sealing Insert
with Claw
Clamping
Nut
Advertising
This manual is related to the following products: