ACTi KCM-7111 - Manual (Page 20)

www.acti.com
Hardware Manual
20
Step 4: Install the Camera to the Surface
1. If necessary, insert a micro SHDC card (up to 32 GB) into the card slot of the camera.
2. Align the camera screw holes and the conduit hole (if necessary) to the holes on the surface
and attach the three (3) supplied screws to secure the camera.
CAUTION: When using electric screwdrivers, be careful not to touch the internal
camera components while attaching the screws. Since electric screwdrivers vary in sizes,
speed, and force, they may bruise and damage the internal camera components.
DISCLAIMER: ACTi will not be responsible for camera damage caused by improper
installations or the misuse of equipment for installation.