ACTi KCM-7111 - Manual (Page 21)

www.acti.com
Hardware Manual
21
Step 5: Connect the Cable(s)
1. If the cables will be routed along the surface , pull the network cable and the other cables
(if any) through the side conduit hole and attach the sealing insert and the clamping nut to the
gland body.
Using Flex Conduit Using Naked Cable
2. Connect the network cable to the Ethernet port and the other cables (if any) to their
corresponding connectors on the camera.
Step 6: Access the Camera Live View
See Accessing the Camera on page 32 for more information.
Digital Input / Output
(DI/DO) Connector
12V Power Connector
Audio Input / Output
Connector Ethernet Port
or