Waterproof solution with conduit, Waterproof solution with, Conduit – ACTi KCM-7111 User Manual
Page 16: Hardware manual
Hardware Manual
Waterproof Solution with Conduit
This section describes the procedures to waterproof the cabling connections using the bundled
conduit gland and flexible conduit. This is the recommended if other input/output devices or an
external power adapter will be connected to the camera or when an exterior-grade Ethernet cable
is not available.
1.
Prepare the following materials for waterproof installation:
Conduit Gland
(included in the camera package)
For use with 3/8” flexible conduit
For use with 1/2” flexible conduit
Flexible Conduit
3/8” or 1/2" Trade size
(not included in the package)
Network Cable
CAT 5 or CAT 6
(not included in the package)
NOTE:
The bundled conduit gland may vary.
Check the conduit gland that came with your
package to determine if 3/8” or 1/2" is the
suitable flexible conduit size.
2.
Disassemble the bundled conduit gland as shown below:
NOTE:
In this installation, the conduit gland body can be securely attached to the camera;
therefore the use of lock nut is not necessary. Please set the lock nut aside.
or
Lock Nut
Body
Sealing Insert
Clamping Nut