Emerson Process Management OXYMITTER 4000 - Manual (Page 45)

Instruction Manual
IB-106-340C Rev. 4.1
July 2004
Rosemount Analytical Inc. A Division of Emerson Process Management Description and Specifications 1-15
Hazardous Area Oxymitter 4000
Table 1-1. Product Matrix (Continued)
Continued Code Operator Interface (3)
1 Membrane Keypad - HART Capable
2 Membrane Keypad - HART Capable, Glass Window
3 LOI - HART Capable, Glass Window, English Only
Code Language
1 English
2 German
3 French
4 Spanish
5 Italian
Code Termination Filtering
00 No Option - Specified as part of Electronic Housing
Code Calibration Accessories
00 No Hardware
01 Cal/Ref Flowmeters and Ref Pressure Regulator
02 IMPS 4000 (Safe Area Only)
03 SPS 4000 Remote Mounted (Safe Area Only)
Code Hazardous Area Approval
00 Specified as part of the electronics
Code Electronics to Probe Cable
00 No Cable
10 20 ft (6 m) Cable
11 40 ft (12 m) Cable
12 60 ft (18 m) Cable
13 80 ft (24 m) Cable
14 100 ft (30 m) Cable
15 150 ft (45 m) Cable
16 200 ft (61 m) Cable
Continued 1 3 00 03 00 10 Example
NOTES:
(1) Recommended uses: High velocity particulates in flue stream, installation within 11.5 ft (3.5 m) of soot blowers or heavy salt cake buildup.
Applications: Pulverized coal, recovery boilers, lime kiln.
(2) Where possible, specify ANSI, DIN, or JIS designation; otherwise, provide details of the existing mounting plate as follows:
Plate with studs Bolt circle diameter, number, and arrangement of studs; stud thread; and stud height above mounting plate.
Plate without studs Bolt circle diameter, number, and arrangement of holes; thread; and depth of stud mounting plate with accessories.
(3) Startup, calibration, and operation can be implemented using the standard membrane keypad. Remote access and additional functionality
available via HART Communications [Model 275/375 Handheld Communicator with Hazardous Area Oxymitter 4000 device descriptor (DD)]
required.
1