Dot1x timeout re-authperiod, Dot1x timeout supp-timeout – Amer Networks SS3GR24i User Manual
Page 139
SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
133
dot1x timeout re-authperiod
Purpose
Used to configure the seconds between re-
authentication attempts made by the switch.
Syntax
dot1x timeout re-authperiod <seconds>
Description
To set the number of seconds between re-
authentication attempts.
Parameters
<seconds> Set the number of seconds
Menu
Advanced Switch Configuration -> Port Base Access
Control
Restrictions Interface configuration
Example usage:
Set re-authentication time 120 sec on port 1/7
24P switch(config)# interface fa1/7
24P switch(config-if)# dot1x re-authentication
24P switch(config-if)# dot1x timeout re-authperiod 120
dot1x timeout supp-timeout
Purpose
Used to configure the dot1x supplicant timeout for the
switch.
Syntax
dot1x timeout supp-timeout <seconds>
Description
To set the dot1x Supplicant Timeout.
Parameters
<seconds> Set the number of seconds
Menu
Advanced Switch Configuration -> Port Base Access
Control Configuration Menu
Restrictions Interface configuration