Amer Networks SS3GR24i - Manual (Page 144)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
138
Example usage:
Initiate 802.1x status on port 1/5.
24P switch(config)# interface fa1/5
24P switch(config-if)# dot1x init
dot1x control-direction
Purpose Used to configured the port Administrative Control
Direction
Syntax dot1x control-direction {both | in}
Description To set the port Administrative Control Direction.
Parameters <both> The dot1x authentication will be imposed only
on the incoming traffic
<in> The dot1x authentication will be imposed on
incoming and outgoing traffic
Menu Advanced Switch Configuration -> Port Base Access
Control Configuration Menu
Restrictions Interface configuration
Example usage:
Set the switch’s Control direction to in for port 1/5.
24P switch(config)# interface fa1/5
24P switch(config-if)# dot1x control-direction in