Amer Networks SS3GR24i - Manual (Page 142)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
136
Example usage:
Set the switch’s transmit time to 60 sec on port 1/3
24P switch(config)# interface fa1/3
24P switch(config-if)# dot1x timeout tx-period 60
dot1x max-req
Purpose Used to configure the EAP request time frame.
Syntax dot1x max-req <value>
Description Set the number of times that the switch sends an
EAP-request/identity frame to the client before
restarting the authentication process.
Parameters <value> Set the number of times
Menu Advanced Switch Configuration -> Port Base Access
Control Configuration Menu
Restrictions Interface configuration
Example usage:
Set the switch’s request times to 4 on port 1/3
24P switch(config)# interface fa1/3
24P switch(config-if)# dot1x max-req 4