Amer Networks SS3GR24i - Manual (Page 141)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
135
dot1x timeout quiet-period
Purpose Used to configure the quite time state after a failed
authentication.
Syntax dot1x timeout quiet-period <seconds>
Description Set the number of seconds that the switch remains in
the quiet state following a failed authentication
exchange with the client.
Parameters <seconds> Set the number of seconds
Menu Advanced Switch Configuration -> Port Base Access
Control Configuration Menu
Restrictions Interface configuration
Example usage:
Set the switch’s quiet period time at 120 sec on port 1/7
24P switch(config)# interface fa1/7
24P switch(config-if)# dot1x timeout quiet-period 120
dot1x timeout tx-period
Purpose Used to configure the time difference between EAP
request transmit and receive.
Syntax dot1x timeout tx-period <seconds>
Description Set the number of seconds that the switch waits for a
response to an EAP-request/identity frame from the
client before retransmitting the request.
Parameters <seconds> Set the number of seconds
Menu Advanced Switch Configuration -> Port Base Access
Control Configuration Menu
Restrictions Interface configuration