Edimax Technology Wireless LAN Access Point - Manual (Page 34)

W ireless L AN AP Configuration
Authentication
Client table
This tabl e recor ds the clients of t he
RADIUS ser ver t hat need to
aut henticat e wireless LAN us ers.
Authentication client inf ormation
includes the “Client I P” and “Secret
Key”. An authentication client has t o
use t he “Secret Key” t o login t o t he
RADIUS ser ver befor e it can st art t o
aut henticat e wireless LAN us ers. An
aut hentication client can be an access
point .
Add an
aut hentication
client
Fill in the “Client IP”, “Secret Key” and
“Re-Type Secret Key” of the new
aut hentication client t o be added and
then click “Add”. Then t his new
aut hentication will be added int o t he
aut hentication client t able bel ow. If you
find any t ypo before adding it and want
to ret ype again. J ust clic k “Reset” and
“Client IP”, “Secr et Key” and “Re-T ype
Secret” fiel ds will be cl eared.
Remove
aut hentication
client from t he
table
If you want t o remove some
aut hentication client from t he table,
select t he authentication clients you
want t o remove in the table and t hen
click “Delet e Selected”. If you want
remove all user authentication clients
from t he table, j ust clic k “Delet e All”
butt on.
Reset
Click “Reset” will clear your current
selections.
Click Appl y butt on at the bottom of the screen t o save t he
above configurations. You can now configure other advanc e
sections or st art using t he Access Point.
32