Edimax Technology Wireless LAN Access Point - Manual (Page 39)

W ireless L AN AP Configuration
Start I P/End IP
You c an designate a particular IP
address range for your DHCP ser ver t o
issue IP address es to your LAN Clients.
By default the I P range is from: Start I P
192.168. 2.100 to End IP 192. 168.2. 200.
Domai n Name
You c an specif y the Domai n Name for
your Acc ess Point.
Leas e Time
The DHCP Server when enabled will
temporaril y give your LAN client an I P
address . I n the Leas e Time s etting you
can s pecif y t he time period that t he
DHCP Server lends an I P address to
your LAN clients. The DHCP Ser ver will
change your LAN client’s IP address
when this ti me thres hold period is
reached.
Click Appl y butt on at the bottom of the screen t o save t he
above configurations. You can now configure other advanc e
sections or st art using t he Access Point.
3. 2. 7 C o n f i g u r at i o n T o o l
The Configuration Tools screen allows you to s ave (Backup)
the Access Point’s current configuration set ting. Saving the
configuration settings provi des an added protecti on and
convenienc e s houl d problems occ ur with the Access Poi nt
and you have t o res et t o f actor y def ault . When you save t he
configuration setting (Bac kup) you c an re-load the saved
configuration int o t he Access Poi nt t hrough the Restore
selection. If extreme problems occ ur you can us e t he R estore
to Factor y Default s election, t his will set all configurati ons to
its original def ault s etti ngs (e.g. when you first purchased the
Access Point).
37