Northfire 3400, 17 glass door instructions – Archgard 3400-DVTR20N-2 User Manual

Page 17

Advertising
background image

Northfire 3400

17

GLASS DOOR INSTRUCTIONS

Removing the Glass Door

Remove the top & bottom louvers (or optional front).

Unhook the door latches found on the bottom of the firebox.

Carefully lift and remove the door.

Place the door at a safe location where it cannot be scratched or damaged.

If the glass door is damaged, it must be replaced with another glass door certified with this
appliance only.

Replacement glass doors are available through your Archgard dealer

See Replacement Parts page 29


Replacing the Glass Door

Check the condition of the glass and the gasket before installing door.

Carefully hook the door onto the tabs on the top of the firebox.

Connect the door latches, at the bottom of the door, and close latches.

Install the top & bottom louvers (or optional front).


If the glass has been damaged contact your dealer and replace the door assembly with a
new assembly provided by your dealer.

WARNING:
-
Do not attempt to remove the glass door when the appliance is hot.
- Do not abuse the glass door.
- Do not strike or slam the glass.
- Do not operate this appliance with cracked or broken glass.
- Do not use any substitute materials.

In the event your glass cracks or breaks, it must be replaced by the exact same size and
material. It is made from high temperature ceramic material. See replacement parts list
on Pg. 29 and contact your nearest Archgard Dealer

Advertising