Archgard 3400-DVTR20N-2 - Manual (Page 29)

Northfire 3400
29
SERVICING Cont...
Regularly
-Clean and remove any lint accumulations or debris from the grills and in any combustion
and convection air passage ways.
- Keep the appliance area free from combustible materials, such as paper, wood, clothing,
gasoline and flammable solids, liquids and vapors.
- Check for unusual noise, odor and operation of the appliance.
- Check the vent terminal for any damage, or obstruction by plants or debris accumulation.
- Visually check the height and color of the burner and pilot flames.
Once a Year,
- Remove the glass door and clean the inside of the glass with a soft, non-abrasive cloth and
water or a suitable, mild, non-abrasive cleaner.
- Carefully remove the logs and gently brush off any loose carbon deposits. This job is best
done outside the house, wearing a dust mask.The logs are very fragile, take care not to break
them. After cleaning, the logs must be replaced as per the instructions in this manual.
Once a Year have a qualified service technician,
- Completely inspect the appliance and the venting system.
- Clean and remove any lint accumulations or debris in the firebox, on the burners, on
the pilot, at the primary air opening, on the convection air blower and in any
combustion and convection air passage ways.
- Check the safety system of the gas valve.
WARNING :
All parts removed or disturbed must be properly replaced after maintenance. Service and
repair must be conducted by a qualified service person. If these instructions are not
followed, a fire or explosion may result, causing property damage, personal injury or loss of
life.
Caution: Do not service appliance while it is operating or still hot.
Cleaning the Appliance: The exterior surfaces and glass may be cleaned with a soft, non-
abrasive, cloth and water or a suitable mild, non-abrasive cleaner.