ARM Electronics RT4CD - Manual (Page 17)

4.2 MAIN MENU OPTIONS___RECORD 4.2 MAIN MENU OPTIONS___RECORD
Move the cursor to “RECORD” and press ”ENTER”. The screen will show the following options.
1) MANUAL RECORD ENABLE:
Start / stop the manual recording function.
2) EVENT RECORD ENABLE:
Start / stop the event recording function. When this function is activated, the recording
will be triggered by the motion or external alarm.
3) TIMER RECORD ENABLE:
Start / stop the timer recording function.
4) OVERWRITE:
Select to overwrite previous recorded videos in HDD. When the HDD is full under O/W
recording mode, previous recorded files will be overwritten without further warning
notices.
5) RECORD IMG SIZE:
There are two recording options, FRAME and CIF. When changing the record image
size, users need to stop recording first.
6) RECORD QUALITY:
There are four quality settings: BEST, HIGH, NORMAL & BASIC.
7) MANUAL RECORD IPS:
Recording is activated by pressing the “REC” button. Select the images per second of
MANUAL RECORD, The options are as following:
NTSC NTSC: FRAME: 30, 15, 7, 3 PAL PAL: FRAME: 25, 12, 6, 3
CIF: 120, 60, 30, 15 CIF: 100, 50, 25, 12
(MENU)
► RECORD RECORD
TIMER
DATE
ADVANCE
Press “MENU” button to enter the main menu list. The default admin password is 0000.
Enter the default password and press “ENTER”. (Users could alter the password later. Please
refer to “Section 4.11 ADVANCE MENU_SYSTEM”)
Use the following buttons for menu settings:
“▲▼ ◄► “ to move the cursor.
“＋ , －” to choose the numbers / selections.
“ ENTER “ to go to the submenu / to confirm the selection
“ MENU “ to go to the menu OSD /
to confirm the change / to exit the menu OSD
RECORD RECORD
MANUAL RECORD ENABLE
EVENT RECORD ENABLE
TIMER RECORD ENABLE
OVERWRITE
RECORD IMG SIZE
RECORD QUALITY
MANUAL RECORD IPS
EVENT RECORD IPS
TIMER RECORD IPS
TOTAL IPS SHARE
14