ARM Electronics RT4CD - Manual (Page 19)

4.4 MAIN MENU OPTIONS___DATE 4.4 MAIN MENU OPTIONS___DATE
(MENU)
RECORD
TIMER
► DATE DATE
ADVANCE
Move the cursor to “DATE” and press ”ENTER”. The screen will show the following
options. Please DO NOT change the date or time when the recording function is
activated. See “2.1 GETTING STARTED” at P.10 for details.
NOTE: The illustrated setting means: During the daylight saving time period (start from the 4 th Sunday of March,
end on the 4 th Sunday of October), the DVR system time will plus one hour.
1) DATE:
Select scheduled record days (SUN/MON/TUE/ WED/ THU/ FRI/ SAT/ MON–FRI /
SAT-SUN / DAILY/OFF) to set up timer record schedules.
NOTE 1 : Specific days could be changed by “＋” or “－” button.
NOTE 2 : If you plan to set the timer recording across the midnight, there are two
ways for setting the timer recording schedule. Please follow the instructions below.
Example 1 : If you only want to set the recording timer schedule from every Sunday
23:30 to Monday 23:30, then you could set the recording timer schedule as Sunday
from 23:30 to 23:30.
Example 2 : If you plan to set the timer recording from Sunday 08:00 to Monday
15:00, then you could set the recording timer schedule as Sunday from 08:00 to
24:00, and Monday 24:00 to 15:00.
Note: Please turn on “TIMER RECORD ENABLE” in RECORD” menu (see P.14).
2) START:
Select the start time for the recording.
3) END:
Select the finish time for the recording.
DATE DATE
DATE 2006-MAY-12 16:30:00
FORMAT Y-M-D
DAYLIGHT SAVING ON
1) DATE:
Set the correct time of the DVR ( YEAR / MONTH / DAY / HOUR / MIN / SEC)
2) FORMAT:
There are three formats: Y-M-D, M-D-Y, D-M-Y.
3) DAYLIGHT SAVING:
Specify whether to use daylight saving time and time period. ( START / END)
Daylight saving time can be adjusted manually.
Enter the daylight saving menu mode to set the start time and the end time,
and adjust hours of the daylight saving.
DAYLIGHT SAVING DAYLIGHT SAVING
START 4TH-SUN-MAR 01: 00: 00
END 4TH-SUN-OCT 01: 00: 00
ADJUST 01 : 00
16