ARM Electronics RT4CD - Manual (Page 42)

39
DVR DVR – – Camera Setting Camera Setting
c Each camera channel can be adjusted
independently.
d Select the desired camera channel.
Press “
Edit Edit” to enter the setting box.
e Title: Title:
Enter the camera channel name up to
6 characters.
f Adjustment: Adjustment:
Adjust the BR (brightness) / CT
(contrast) / SU (saturation) / HU (hue)
/ REC (recording) of the camera.
g After setting, press “OK” and then
press “APPLY” to confirm.
c Select the desired channel of the
installed external device.
Press “
Edit Edit” to enter the setting box.
d Device Type Device Type:
Choose either general camera or
PTZ camera.
e ID No. ID No. :
Set the ID number (0 ~ 255) of the
installed external PTZ device.
f Protocol Type Protocol Type :
Choose “ NORMAL NORMAL” protocol for our
own brand camera.
Choose “
P P - - D D” protocol for PELCO-D
protocol camera.
g Baud Rate Baud Rate :
Set the baud rate of each channel
(2400, 4800, 9600, 19200, 38400,
57600, 115200).
h After setting, press “OK” and then
press “APPLY” to confirm.
Device Device
4CH DVR
4CH DVR