Ensemble Designs BrightEye 57 3G/HD/SD/Analog Test Signal and Sync Pulse Generator - Manual (Page 17)

www.ensembledesigns.com BrightEye 57
TM BrightEye 57 3G/HD/SD/Analog Test Signal and Sync Pulse Generator User Guide
Page 17
Genlocked Test Signals
BrightEye 57 can be used to provide bars and other test signals to facility devices timed to the same
house reference. A number of test signals can be fed to a router, switcher, and other devices in a facility
where genlocked timing is important.
As shown in the example below, a BrightEye 57 is fed with the house reference to the Ref In BNC. The
audio tone can be embedded into the SDI timed test signal output and fed to an HD or SD SDI router
and switcher. This allows each of the test signals to be in time with the signals fed to the other devices.
BrightEye 57 Genlocked Test Signal Application
BrightEye 57
SDI Switcher
SDI Router
House Ref
NTSC or PAL
Ref In
SDI Test Signal
with Embedded
Audio Tone