H3C Technologies H3C S10500 Series Switches User Manual

Page 48

Advertising

[Sysname] interface bridge-aggregation 2

[Sysname-Bridge-Aggregation2] link-aggregation mode dynamic

[Sysname-Bridge-Aggregation2] mad enable

[Sysname-Bridge-Aggregation2] quit

# Assign ports GigabitEthernet 1/4/0/2, GigabitEthernet 2/4/0/2, GigabitEthernet 3/3/0/1, and

GigabitEthernet 4/3/0/1 to the aggregate interface for LACP MAD detection.

[Sysname] interface gigabitethernet 1/4/0/2

[Sysname-GigabitEthernet1/4/0/2] port link-aggregation group 2

[Sysname-GigabitEthernet1/4/0/2] quit

[Sysname] interface gigabitethernet 2/4/0/1

[Sysname-GigabitEthernet2/4/0/1] port link-aggregation group 2

[Sysname-GigabitEthernet2/4/0/1] quit

[Sysname] interface gigabitethernet 3/3/0/1

[Sysname-GigabitEthernet3/3/0/1] port link-aggregation group 2

[Sysname-GigabitEthernet3/3/0/1] quit

[Sysname] interface gigabitethernet 4/3/0/1

[Sysname-GigabitEthernet4/3/0/1] port link-aggregation group 2

[Sysname-GigabitEthernet4/3/0/1] quit

Configure Device E as the intermediate switch

Device E needs to act as the intermediate switch to forward and process extended LACPDUs exchanged

between the member switches for MAD detection.

CAUTION:

If the intermediate switch is in an IRF fabric, you must assign this fabric a different domain ID than the
LACP MAD-enabled IRF fabric.

# Create a dynamic aggregate interface.

<Sysname> system-view

[Sysname] interface bridge-aggregation 2

[Sysname-Bridge-Aggregation2] link-aggregation mode dynamic

[Sysname-Bridge-Aggregation2] quit

# Assign ports GigabitEthernet 4/0/1, GigabitEthernet 4/0/2, GigabitEthernet 4/0/3, and
GigabitEthernet 4/0/4 to the aggregate interface for LACP MAD detection.

[Sysname] interface gigabitethernet 4/0/1

[Sysname-GigabitEthernet4/0/1] port link-aggregation group 2

[Sysname-GigabitEthernet4/0/1] quit

[Sysname] interface gigabitethernet 4/0/2

[Sysname-GigabitEthernet4/0/2] port link-aggregation group 2

[Sysname-GigabitEthernet4/0/2] quit

[Sysname] interface gigabitethernet 4/0/3

[Sysname-GigabitEthernet4/0/3] port link-aggregation group 2

[Sysname-GigabitEthernet4/0/3] quit

[Sysname] interface gigabitethernet 4/0/4

[Sysname-GigabitEthernet4/0/4] port link-aggregation group 2

[Sysname-GigabitEthernet4/0/4] quit

Troubleshoot the IRF when the MAD mechanism detects errors

Advertising

This manual is related to the following products:

H3C S7500E Series Switches, H3C S6800 Series Switches, H3C S6300 Series Switches, H3C S5800 Series Switches, H3C S5820X Series Switches, H3C S5820V2 Series Switches, H3C S5830 Series Switches, H3C S5830V2 Series Switches, H3C S3600V2 Series Switches

Popular Brands

Popular manuals