H3C Technologies H3C S9500 Series Switches - Manual (Page 108)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 5 System Debugging
5-6
Auto-booting...
Booting from Flash...
Decompress Image...................................................
.......................................................OK!
Starting at 0x10000...
User interface Con 0 is available
Press ENTER to get started.
The information displayed above indicates that the automatic startup of the switch is
complete.
Press Enter. The following prompt is displayed. You can configure the switch now.
<H3C>
Note:
The S9500 series provide abundant command views. For more information about the
configuration commands and the Command Line Interface (CLI), see H3C S9500
Series Routing Switches Operation Manual.