H3C Technologies H3C SR6600 - Manual (Page 38)

30
Powering on the router
Checking before power-on
Before powering on the router, verify the following items:
• The power cord and grounding cable are properly connected.
• The power supply voltage meets the requirement of the router.
• The console cable is properly connected; the terminal or PC used for configuration has started; and
the configuration parameters have been set.
• If a CF card is used, check whether the CF card is in position.
Checking after power-on
After powering on the router, check the following items:
• The LEDs on the front panel are normal. For more information about the LED status, see “ Appendix
B LEDs .”
• The fans work properly, and you can hear fan rotating.
• The buzzer beeps at power-on.
• The configuration terminal displays information normally. You can see the startup window on the
local configuration terminal. For more information, see “
Displaying boot information .”
• After the POST, the system prompts you to press Enter. When the command line prompt appears,
the router is ready to configure.
Displaying boot information
After power-on, the following information appears on the terminal screen:
System start booting...
Booting Normal Extend BootWare........
****************************************************************************
* *
* H3C SR6602 Router BootWare, Version 1.31 *
* *
****************************************************************************
Copyright (c) 2004-2011 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Jan 13 2011
CPU Type : XLR732
CPU L1 Cache : 32KB
CPU Clock Speed : 1000MHz
Memory Type : DDR2 SDRAM
Memory Size : 1024MB
Memory Speed : 533MHz
BootWare Size : 1536KB
Flash Size : 4MB
cfa0 Size : 495MB