H3C Technologies H3C SR6600 - Manual (Page 58)

50
Memory module slot
Figure 45 Memory module slot
1
2
(1) Release latch (2) Memory module slot
Removing a memory module
Follow these steps to remove a memory module:
Step1 Make sure all power sources to the router are disconnected.
Step2 Pull the release latches away from the memory module at both ends so that the memory module is lifted
from the memory module slot.
Step3 Holding the non-conductive edge, remove the memory module.
Figure 46 Remove the memory module
CAUTION:
•
Do not touch the surface-mounted components of the memory module directly with your hands to avoid
damaging the memory module. Hold the memory module only at its non-conductive edge.
• To protect the removed memory module, place it in an antistatic bag.
Installing a memory module
Follow these steps to install a memory module:
Step1 Make sure all power sources to the router are disconnected.
Step2 Align the polarization notch of the memory module with the key in the memory module slot.