Configuration procedure – H3C Technologies H3C SecBlade IPS Cards User Manual
Page 52
3-24
Figure 3-20 Network diagram for OAA configuration
Internet
Router
Network
Management
Switch
IPS
OAA client
Device
OAA server
Vlan-int100
192.168.1.1/24
Ten-GigabitEthernet2/0/1
192.1681.2/24
GE4/0/1
GE4/0/2
EnterPrise
Configuration procedure
1) Configure the OAA server
Follow these steps to configure the OAA server (the detailed configuration is omitted here):
z
Enable the OAA server.
z
Configure a VLAN interface for VLAN 100, and set the IP address of the interface to 192.168.1.1.
z
Specify the SNMP version as v3.
z
Create a user with the username v3user, and specify the security level as no authentication no
privacy.
2) Configure the OAA client
# Configure the OAA client.
z
Select System Management > Device Management > OAA Configuration, and perform the
following operations, as shown in