H3C Technologies H3C VMSG VFW1000 - Manual (Page 62)

57
Recovering the VFW1000 through an ISO image
1. The first several steps are the same as installing the VFW1000 through ISO. For more information,
see "
Installing the VFW1000 through an ISO image (on the VMware platform) " and " Installing the
VFW1000 through an ISO image (on the KVM platform) ."
2. After the installation interface appears as shown in Figure 50 , enter 3 to select Recovery Install to
recover the VFW1000 to the version in the ISO image.
Figure 50 Recovering the VFW1000 through an ISO image
3. After the installation is finished, reboot the system.
For the VMware platform, disconnect the CD drive as shown in
Figure 21 before the reboot.