H3C Technologies H3C SecBlade LB Cards User Manual
Page 52
41
{
Type—(1 byte long) Type of the attribute. It is in the range of 1 to 255. Commonly used RADIUS
attributes are defined in RFC 2865, RFC 2866, RFC 2867, and RFC 2868.
shows a list
of the attributes. For more information, see "
Commonly used standard RADIUS attributes
."
{
Length—(1 byte long) Length of the attribute in bytes, including the Type, Length, and Value
sub-fields.
{
Value—(Up to 253 bytes) Value of the attribute. Its format and content depend on the Type and
Length sub-fields.
Table 10 Commonly used RADIUS attributes
No. Attribute
No.
Attribute
1 User-Name
45 Acct-Authentic
2 User-Password
46 Acct-Session-Time
3 CHAP-Password
47 Acct-Input-Packets
4 NAS-IP-Address
48 Acct-Output-Packets
5 NAS-Port
49 Acct-Terminate-Cause
6 Service-Type
50 Acct-Multi-Session-Id
7 Framed-Protocol
51 Acct-Link-Count
8 Framed-IP-Address
52 Acct-Input-Gigawords
9 Framed-IP-Netmask
53 Acct-Output-Gigawords
10 Framed-Routing
54 (unassigned)
11 Filter-ID
55 Event-Timestamp
12 Framed-MTU
56-59
(unassigned)
13 Framed-Compression
60 CHAP-Challenge
14 Login-IP-Host
61 NAS-Port-Type
15 Login-Service
62 Port-Limit
16 Login-TCP-Port
63 Login-LAT-Port
17 (unassigned)
64 Tunnel-Type
18 Reply-Message
65 Tunnel-Medium-Type
19 Callback-Number
66 Tunnel-Client-Endpoint
20 Callback-ID
67 Tunnel-Server-Endpoint
21 (unassigned)
68 Acct-Tunnel-Connection
22 Framed-Route
69 Tunnel-Password
23 Framed-IPX-Network
70 ARAP-Password
24 State
71 ARAP-Features
25 Class
72 ARAP-Zone-Access
26 Vendor-Specific
73 ARAP-Security
27 Session-Timeout
74 ARAP-Security-Data
28 Idle-Timeout
75 Password-Retry
29 Termination-Action
76 Prompt