Grass Valley 2000NET v4.0.0 User Manual
Page 48
![background image](/files/813168/content/doc048.png)
48
2000NET Instruction Manual
Using the 2000NET GUI
Figure 31. 2000NET Module Configuration for SNMP
The status column to the left of the activation operation pull-down window
provides one of the following status reports:
•
<BLANK> –
No entry has been applied.
•
ACTIVE
– All new status reports will be sent to this destination.
•
NOT IN SERVICE
– The destination has a valid definition but the user has
not activated it.
•
ACTIVE PENDING REBOOT –
This entry indicates the report destination will
become active upon the next module reboot.
•
NOT IN SERVICE PENDING REBOOT
– This entry indicates the report destina-
tion will become inactive upon the next module reboot.
•
NOT READY
– The destination entry is invalid. The IP Address may not be
properly defined or there is no IP Address or Community entry.
2000T3 frame only