Grass Valley 2000NET v4.0.0 - Manual (Page 86)

86 2000NET Instruction Manual
Appendix
d. In the FTP Server Address field, enter the IP Address of the PC that
has the FTPD installed and running.
e. You can enter the Host Name of the PC that has the FTPD running
into the FTP Server Name field. This is an optional step and can be
omitted.
f. Click on Apply to set the FTP Address.
The web page will refresh and the new FTP address should be dis-
played as the Current Settings.
g. In the File Path field, enter the FTP file path of the software update
file.
The FTP file paths use forward slashes. The directory name “/mod-
ular” is not needed in the path name.
h. Submit the form and start the update process by entering the user
name and password and clicking on
Apply .
By default, the Xitami Server has been configured to accept a user
name of “moduser” and a password of “moduser” for the modular
root directory. This may be changed by modifying the ftpusers.sms
file in the C:\Program Files\Xitami directory (see
Password Protec-
tion for Software Upgrades on page 84 ).
After you click on Apply , the web page will be reloaded, displaying
the Progress Monitor ( Figure 61 on page 87 ).
If an incorrect file name or password is entered, the Progress
Monitor will report the condition and allow you to go back to the
Software download page and re-enter the correct information.
The module software compatibility check uses compatibility infor-
mation included in the Field Update File to ensure that the new soft-
ware was intended for this module. In the event that there is a
mismatch, the Net Board will abort the upgrade.
Note Do not make any changes to the web page during the software download.
i. Once the download has started, wait for the Success message at the
end of the Progress Monitor screen to appear (
Figure 61 on page 87 )
and allow the frame to reboot before making any web page changes.
Click on the
Software Update link again to refresh the page.