Configuration, Configuration summary, Video timing and freeze controls – Grass Valley 8964FS User Manual
Page 13
8964FS Instruction Manual
13
Configuration
Configuration
The 8964FS can be configured locally using onboard switches or remotely
using the 8900NET network interface GUI or a networked control panel.
Refer to the following sections for configuration instructions:
•
Configuration Summary (
•
Local Onboard Module Configuration (
•
Remote Control and Monitoring (
•
Newton Control Panel Configuration (
)
Operation of these control types is explained in detail in their respective
sections of this manual.
Configuration Summary
This section provides a summary of all parameters that can be configured
on the 8964FS module. Use this section in conjunction with the specific con-
figuration method instructions for each configuration type.
provides a summary in table format of all parameters and their
ranges, default values, and remote, local, and control panel function names
and locations for setting each value.
Video Timing and Freeze Controls
On a 8964FS module, the following timing adjustments are available:
•
Horizontal Timing – adjusts the horizontal delay of the channel output
in half pixels
•
Vertical Timing – adjusts vertical delay in line increments
Also available with the 8964FS are the following freeze controls (one must
be selected from the five choices):
•
AutoBlue – when AutoBlue is enabled on a channel, the output will
automatically freeze to a blue screen when the input signal is lost on
that channel.
•
AutoFreeze – when AutoFreeze is enabled on a channel, the output will
automatically freeze on the last valid field when the input signal is lost
on that channel.
•
Field 1 – manually freeze the output signal on field 1 of the last frame.
•
Field 2 – manually freeze the output signal on field 2 of the last frame.
•
Frame – manually freeze the output signal on the last frame.