Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 68)

68 Aurora Browse Installation and Configuration Guide April 6, 2010
Chapter 4 Installing the Aurora Browse System Software
Add software package to deployment group for
Aurora Browse devices
Prerequisites for this task are as follows:
• You can access the software package file from the SiteConfig control point PC.
• The devices to which you are deploying software are in a deployment group.
• To review which software roles to install on which machine, see “Where to install
Browse/MediaFrame software roles” on page 60 .
Use the following procedure to add one or more software package installation files to
the deployment group that contains the devices in the following list. Depending on
your system design, you might not have all of the device-types listed:
• MediaFrame server
• MDI server
• Aurora Proxy Encoder
• K2 BaseCamp Express
• Aurora Suite
For this release of software, identify and add software package installation files as
follows:
Depending on the K2 software version of your K2 SAN, also add software package
installation files as follows:
NOTE: Add files for either 3.x or 7.x. Do not add files for both 3.x and 7.x.
• If your devices access storage on a K2 software version 3.x K2 SAN, add software
package installation files as follows:
• If your devices access storage on a K2 software version 7.x K2 SAN, add software
Software File name
MediaFrame Server MediaFrameServer_7.0.0.xxxx.cab
Aurora Proxy Encoder AuroraProxyEncoder_7.0.0.xxxx.cab
Aurora Suite AuroraSuite_7.0.x.xxxx.cab
Grass Valley Windows Monitoring SNMP agent PCMonitoring_x.x.x.xx.cab
Software compatible with 3.x K2 SAN File name
Generic iSCSI client GenericISCI_x86_3.x.x.cab
GVG MLib software GVG_MLib_3.x.xxxx.cab