Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 97)

April 6, 2010 Aurora Browse Installation and Configuration Guide 97
Configure M-Series MDI
Configure M-Series MDI
This page configures the Managed Device Interface (MDI) for an M-Series iVDR
system.
Multiple M-Series MDIs run on a single machine (the MDI Server), but they each
need their own process port number. For this purpose, enter incrementing numbers in
the “Port” field. The MDIs and their port numbers must match settings as in
“Configure MediaFrame ASK: Register components” on page 84 . To make the
configurations easier to read for troubleshooting purposes, add MDIs sequentially so
there is a correlation between the port number and any number in the MDI name.
To make the configurations easier to read for troubleshooting purposes, add MDIs
sequentially so there is a correlation between the port number and any number in the
MDI name.
1. Locally on the MDI server, select Programs| Grass Valley | MediaFrame Config .
Select the MDI Configuration tab.
2. Enter the name of the MediaFrame server. Do not modify Port 9010. See “Ports and
services mapping” on page 47 .
3. Select the M-Series MDI tab.
4. Under Registered M-Series Devices, click Add.
5. Enter the MDI name or click ... to browse for the M-Series MDI.
6. Enter the port number 9140.