Grass Valley CopperHead Pro - Manual (Page 26)

20
CopperHead System Components
Camera Unit - Rear Side
Camera Unit - Fiber Connector/Swivel (Section B)
The CopperHead Pro Camera Unit is typically equipped with one of the three fiber
connectors shown in
Figure 3-6 :
Fig. 3-6: Camera Unit Fiber Connectors
• 17A: MX Expanded Beam (unpowered)
• 17B: SMPTE 304M (powered)
• 17C: OpticalCON (powered or unpowered)
Camera Unit - Battery Mount (Section C)
The CopperHead Pro Camera Unit can be shipped with a variety of plates to attach the unit
to your camera. The Anton Bauer mount and the "V"-mount are the most common,
although PAG and other battery mount systems are also available by special order. Formore
information, contact Grass Valley (see
Contact Us on page 57) or your authorized dealer.
Fig. 3-7: Camera Unit - Battery side mounting plates
Anton Bauer Battery
Mounting Plate
V-Mount Battery
Mounting Plate