Grass Valley CopperHead Pro - Manual (Page 28)

22
CopperHead System Components
Base Station Front Panel
• 2: Return Video/Sync: indicates the presence of the analog video signal (VBS) at Base
Station's VBS In BNC. This VBS can be used for return "program" video or for genlock to
the camera.
• 3: SDI Presence: lights Green to indicate the presence of digital SDI video from Camera
Unit. This LED stays illuminated Green as long as the Base Station is receiving adequate
optical power. See
A Brief Guide to Measurement of Fiber Optic Signal Strength on
page 61 for more information.
• 4: Intercom: lights Green to indicate audio activity on the Intercom channel.
• 5: Control: lights Green when camera control data is being transmitted between
Camera Unit and Base Station.
Front Panel Section B- Power Switch and Indicator
Fig. 3-11: Base Station Power Switch
• 6: Power: indicates that power is applied to Base Station.
• Green when Base Station is fully powered
• Red when there is power connected to Base Station, but Base Station is not turned
on
• 7: Power Switch: switchesthe Base Station on or off. With a hybrid power system
(power supplied by Base Station), this switch controls power to the camera and Camera
Unit.