Grass Valley CopperHead Pro - Manual (Page 29)

23
CopperHead Pro
User Guide
Front Panel Section C- Hybrid Power Status Indicators
This section is optional, and only appears on CopperHead Base Stations equipped with
internal power supplies designed to work with a CopperHead Camera Unit connected to a
PowerWafer.
Fig. 3-12: Base Station Hybrid Power Status Indicators
• 8: Camera Power: lights Green when high voltage is being supplied to Camera Unit.
• 9: Cable Open: lights Red when the SMPTE hybrid cable is open or when there is no
SMPTE hybrid cable connected.
High voltage will not be applied to the hybrid connector until the open condition is
corrected.
• 10: Cable Short: lights Red when the SMPTE hybrid cable has a short circuit in it.
High voltage will not be applied to the hybrid connector until the short-circuit is
corrected or the cable is replaced.