Grass Valley CopperHead Pro - Manual (Page 37)

31
CopperHead Pro
User Guide
Fig. 3-22: PowerPlus 3000 LED Indicators
• 1: +24 Volt DC "A": lights up when 24 Volts is available on connector X
• 2: Power In: indicates that power is being received from the HDX power supply
• Red - initial safety handshaking in progress, full power not engaged.
• Green - safety handshaking completed, full power being received from HDX power
supply.
• 3: Camera Out: indicates that 12VDC is being supplied to the battery plate
• 4: Auxilliary +12 Volt Output: indicates 12 Volt is being supplied to the 4-pin XLR
connector(#7 on Figure 3-23 )
• 5: +24 Volt DC "B": lights up when 24 Volts is available on connector(#10 on Figure 3-
23 )
• 6: Battery Plate: used to mount the PowerPlus to the CopperHead Camera Unit
(Anton/Bauer or V-Mount)