Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 115)

103
iMC-Panel-100
Operator’s Guide (for Imagestore 750s)
Removing a Source from a Group
Follow these steps:
1 Press any blue source button. In this example, the first source (VTR6Don) was pressed:
Again, a dialog appears:
Press ‘Clear Slot’ to remove the source.
Or, press ‘Cancel’ to return to the ‘Sources’ menu. Press ‘Show Selection’ if the current selec-
tion is not visible in the window.
2 The panel immediately returns to the ‘Sources’ menu. The source has been removed and an
empty slot is in its place: