Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 59)

47
iMC-Panel-100
Operator’s Guide (for Imagestore 750s)
Use the cables supplied with the display to make connections. See Chapter 4, Connections , for
connection details.
Important: do not make any connection to the RS-232 port.
Notes:
1 You can obtain a manual for the Planar PT1945R monitor from the manufacturer at either
www.planartouch.com or www.planar.com .
2 The on/off switch is at the bottom of the display at the right, as you are viewing the display
from the front.
3 At the right of the display are 4 buttons (not shown here) that are to be used to set the oper-
ating characteristics of the display.