Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 167)

155
iMC-Panel-100
Operator’s Guide (for Imagestore 750s)
Panel Startup and Shutdown
To shutdown or restart the panel, press ‘Panel’ in the main menu to go to the ‘Panel Info menu.
Then go to the ‘Panel Status’ sub-menu:
Choose ‘Shut Down Panel’ to perform a clean shut down. You must later cycle power to restart
the panel.
S Warning: never just shut off power. You risk damage to the panel’s flash memory.
Choose Restart Panel’ to restart the panel.
Please note:
• When the panel is starting up and shutting down, all buttons and knobs are disabled and
various buttons will cycle on and off.
• While the panel is shutting down, it displays a shutdown message.
The front row of buttons on the panel give a ‘Shutdown Complete’ message when it is safe
to cycle power.
• While the panel is starting up, it displays a startup message. When the panel has finished
starting up, it automatically attempts to connect to its default channel.