Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 631)

September 7, 2007 K2 Storage System Instruction Manual 631
Configuring the NH server - Part 1
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on a NL10
K2 Media Server is as
follows:
• K2 Server
• File System Server
• File System Client
• QuickTime
Software required on a
NL10R K2 Media Server is
as follows:
• K2 Server
• File System Server
• File System Client
• QuickTime
• MPIO
NOTE: MPIO
software is required
on K2 Media
Servers in the
NL10R system and
in other nearline
redundant systems.
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. Refer to
Chapter 16, Managing K2 software. After installing the software, click
Check Software . When all required software reports as Installed, click
Next .
On this page… Do this…